Wilfa COOL 9 CONNECTED Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 326
3 +/- button
EN
• Pressing "+" or "-" button once will increase or decrease set temperature by
1°C (°F). Hold "+" or "-" button for 2s, set temperature on remote controller
will change quickly.
• Release the button after your required set temperature is reached.
Under timer setting status, after each pressing of "+" or "-" button, time will
increase or decrease 0.5h. Hold "+" or "-" button and the time on the display
will change quickly.
4 Swing button
Not available for this unit.
5 Fan button
This button sets the fan speed. The sequence goes from auto, 1, 2, 3, and back
to auto.
6 Sleep button
Press this button to turn the sleep mode on. This function maintains the most
comfortable temperature for you.
7 Timer button
• Press this button once and the characters of HOUR ON (OFF) will flash.
• Meanwhile, press "+" button or "-" button to adjust timer setting (time will
change quickly if holding "+" or "-" button). Time range is 0.5~24hours.
• Press this button again to confirm timer setting and the characters of HOUR
ON (OFF) will stop flashing.
If the characters are flashing but you haven't press timer button, timer setting
status will be stopped after 5s. If timer is confirmed, press this button again to
cancel timer.
8 Health button
Not available for this unit.
9 Wi-fi button
• Press "WiFi" button to turn on WiFi function, "WiFi" icon will be displayed on
the remote controller: Hold "WiFi" button for 5s to turn off WiFi function and
"WiFi" icon will disappear.
• Under off status, press "MODE" and "WiFi" buttons simultaneously for 1s,
WiFi module will restore factory settings.
INSTRUCTION MANUAL · AIR CONDITIONER
18

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido