Drainage Method - Wilfa COOL 9 CONNECTED Manual De Instrucciones

DRAINAGE METHOD

1. Drainwater from the bottom drainage port
– Turn the unit off, and pull the plug from the socket.
– Place a water container under the bottom drainage port, or move the unit to
a place where it can drain.
– Remove the rubber plug of the bottom drainage port to drain water.
– After draining, insert the rubber plug.
– Insert the plug into the socket and turn the unit on.
2. Drain water from the middle drainage port.
Note: Water can be automatically emptied into a floor drain by attaching 13 mm
inner diameter hose (not included)
– Remove the drain cap by turning it anti clockwise then remove the rubber
stopper from the spout.
– Screw the drain connector to the spout by turning clockwise.
AIR CONDITIONER · COOL 9 CONNECTED
29
EN