cecotec TV ALU10165 Manual De Instrucciones página 60

Auto Power On Time: Available if the Power On
Time Type is enabled. Set the desired time for your
TV to come on from standby using the directional
buttons and press OK to save the new set time.
Power Off Time Type: Set your TV to turn off by
itself. Set this option as On or Once to enable a
power off timer to be set, set as Off to disable. If
set as Once the TV will turn off only once at the
defined time in Auto Power Off Time option below.
Auto Power Off Time: Available if the Power Off
Time Type is enabled. Set the desired time for your
TV to go to standby using the directional buttons and
press OK to save the new set time.
Language: Set your language preference.
Keyboard: Select your keyboard type and manage
keyboard settings.
Inputs: Show or hide an input terminal, change the
label for an input terminal, and configure the options
for HDMI CEC (Consumer Electronic Control) function
and display the CEC device list.
Power
Sleep Timer: Define a time after which you want
your TV to enter sleep mode automatically. Set as
Off to disable.
Picture Off: Select this option and press OK to
turn the screen off. Press a button on the remote
or on the TV to turn the screen on again. Note that
you can not turn the screen on via the Volume +/-,
Mute and Standby buttons. These buttons will
function normally.
No Signal Auto Power Off: Set the behaviour of
the TV, when no signal is detected from the currently
set input source. Define a time after which you want
your TV to turn itself off or set as Off to disable.
Auto Sleep: Define an idle time after which you
want your TV to enter sleep mode automatically. 4
Hours, 6 Hours and 8 Hours options are available.
Set as Never to disable.
Picture
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be
set to one of these options: Standard, Vivid, Sport,
Movie and Game.
Dolby Vision Modes: If Dolby Vision content is detected
Dolby Vision Bright, Dolby Vision Dark and Dolby Vi-
sion Vivid picture mode options will be available instead
of other picture modes.
Backlight, Brightness, Contrast, Colour, HUE,
Sharpness settings will be adjusted according to
the selected picture mode.
Dolby Vision Notification: Set your notification ap-
pearance preference for Dolby Vision content. When
turned on, Dolby Vision logo will be displayed on
the screen when Dolby Vision content is detected.
Auto Backlight: Set your auto backlight preference.
Off, Low, Middle and Eco options will be available.
Set as Off to disable.
Backlight: Adjust the backlight level of the screen
manually. This item will not be available if the Auto
Backlight is not set as Off.
Brightness: Adjust the brightness value of the
screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the
screen.
HUE: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the
objects displayed on the screen.
Gamma: Set your gamma preference. Dark, Middle
and Bright options will be available.
Colour Temperature: Set your colour temperature
preference. User, Cool, Standard and Warm op-
tions will be available. You can adjust red, green and
blue gain values manually. If one of these values
is changed manually, Colour Temperature option
will be changed to User, if not already set as User.
Display Mode: Set the aspect ratio of the screen.
Select one of the predefined options according to
your preference.
HDR: Turn the HDR function on or off. This item will
be available if HDR content is detected.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the
process of removing noise from digital or analogue
signals. Set your DNR preference as Low, Medi-
um, Strong, Auto or turn it off by setting as Off.
MPEG NR: MPEG Noise Reduction cleans up
block noise around outlines and noise on the back-
ground. Set your MPEG NR preference as Low,
Medium, Strong or turn it off by setting as Off.
Max Vivid: Manipulates contrast and colour
perception, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set
as On to enable.
Adaptive Luma Control: Adaptive Luma control
adjusts contrast settings globally according to
content histogram in order to provide deeper black
and brighter white perception. Set your Adaptive
Luma Control preference as Low, Medium,
Strong or turn it off by setting as Off.
Local Contrast Control: Local contrast control
divides each frame to defined small regions and
provides ability to apply independent contrast set-
ting for each region. This algorithm improves fine
details and provides better contrast perception.
It makes higher depth impression by enhancing
dark and bright areas without any detail loss. Set
English - 18 -