General Description - Cole-Parmer essentials SH-200 Serie Manual De Instrucciones

SHAKERS & ROCKERS
SH-200D-O, SH-200D-G, SH-200D-S,
SH-200D-M, SH-200D-O-L, SH-200D-R-L,
SH-200D-G-L, SH-200D-S-L, SH-200D-M-L
1. Introduction
Thank you for purchasing this piece of
Cole-Parmer equipment. To get the best
performance from the equipment please read
these instructions carefully before use.
Before discarding the packaging check that all
parts are present and correct.
For your own safety and that of others
please read and understand the safety advice
given below before using the equipment.
2. Safety Advice Before Use
If the equipment is not used in the manner
described in this manual and with
accessories other than those recommended by
Antylia Scientific the protection provided might be
impaired.
This equipment is designed to operate under the
following conditions: -
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature range +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not exceeding 10%
❖ Over-voltage category II IEC 60364-4-443
❖ Pollution degree 2
❖ Use with a minimum distance all around of
200mm from walls or other items
The unit should be carried using both hands.
Do not use in a hazardous atmospheres or with
hazardous materials.
Ensure that the load is balanced.
Do not attempt to stop movement by hand.
Never move or carry the unit when in use or
connected to the mains electricity supply.
In the case of mains interruption, the unit will
not restart on restoration of the electricity
supply.
In the case of mechanical interruption, (e.g.
motor stall), the unit will continue operating on
removal of interruption.
Mechanical energy can lead to breakage of glass
vessels. Use with care.
Mechanical hazard SH-200D-R-L. Cradle
to be assembled onto platform before
operating.

3. General Description

Cole-Parmer shakers and rockers are ideal
instruments for mixing and aerating various
biological and chemical samples in the
laboratory. All models have digital setting of
both speed and an adjustable digital timer that
automatically stops after the set time (1 to 9999
minutes, 1 second to 90 minutes or 1 minute to
9 hours).
The SH-200 Series is available in 2 sizes;
• Personal units with a smaller footprint
• Larger laboratory scale equivalents
Model SH-200D-O and SH-200D-O-L provides
a smooth uniform circular motion with an orbit
of 16mm. Speed range is 30 to 300rpm. Max
load 3kg and 10kg respectively.
Model SH-200D-R-L has a side-to-side
reciprocating action ideal for vigorous
shaking applications. Speed range is 25 to
250rpm. Max load 10kg*.
IMPORTANT
* Maximum speed with 10kg load is 200rpm.
Maximum load for a speed setting of 250rpm is
5kg.
Model SH-200D-G and SH-200D-G-L provides
a 3D gyratory motion, ideal for low foaming
agitation, DNA extractions, staining and
de-staining procedures etc. Speed range is 5 to
70 rpm. Max load 3kg and 10kg respectively.
The angle of tilt can be adjusted manually,
without the need for tools, between 3 and 12°
(see section 4.6 for instructions).