Mafell MT55 18M bl Instrucciones De Funcionamiento Y Seguridad página 17

MT55 18M bl
6. Using the Allen key (B), turn the flange screw
(16) counterclockwise to loosen it.
7. Remove the flange screw (16) and the front
clamping flange (17).
8. Remove the old saw blade.
Clamping flanges must be free of adhering
➢
parts!
The new saw blade can now be installed.
➢
9. Position the new saw blade (18) on the rear
flange (20).
Ensure that the direction of rotation is
➢
correct when you install the saw blade.
The saw teeth or the arrow on the saw
blade (18) must point in the direction of the
arrow (19) on the machine.
10. Fit clamping flange (17) and flange screw (16).
11. Using the Allen key (B), turn the flange screw
(16) clockwise to tighten it.
➢ The saw blade is secured.
12. Close the guard cover.
13. To do this, press the locking lever (8) down.
The mechanism that locks the saw shaft is
➢
activated.
The operating lever is unlocked.
➢
The saw blade is changed.
✓
01/2022
Fig. 10: Removing the old saw blade
Fig. 11: Replacing the saw blade
Fig. 12: Closing the guard cover
17