PRO
EASY
TUNE
TUNE
START
FREE
PROGRAM
7.3 CONFIGURACIÓN PRO TUNE MIG
PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
START
PEAK
BASE
FREE
VOLTS
PROGRAM
H
1
AMP
M/Min
A1
PEAK
BASE
VOLTS
AMP
M/Min
25
SWEISSWELD.COM
6. To change from Eas (Easy Tune) to Pro (Pro Tune)
press the knob and the surrounding LEDs will
illuminate, turning the knob to the left or right you
can go from Easy to Pro and con rm by pressing the
knob again.
At the top, the LEDs will light up depending on the
mode you choose EASY or PRO.
7. To exit the HIDDEN MENU press the knob for a few
seconds.
1. The AMP LED will be on. The rst value that
we can modify in PRO MODE is the amperage,
which refers to the output speed of the wire by
turning the knob we can modify it from 1.5 to
16, and the second is the voltage or arc voltage
that can be adjusted from 10 to 30.