General Maintenance - EGAmaster 66508 Manual De Instrucciones

MAINTENANCE
WARNING:
To avoid serious personal injury, always place the tool in
the center lock position before cleaning, performing any
maintenance, or when storing the tool. Failure to heed
this warning could result in serious personal injury or
property damage.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleumbased
products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
BATTERIES
This product is equipped with a lithium-ion rechargeable
battery. Length of service from each charging will depend
on the type of work you are doing.
The battery in this product has been designed to provide
maximum trouble-free life. However, like all batteries, it will
eventually wear out.
To obtain the longest possible battery life, we suggest the
following:
Remove the product from the charger once it is fully
charged and ready for use.
For product storage longer than 30 days:
Store the product where the temperature is below 80°F.
Store the product in a "discharged" condition.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
See Figure 8.
Remove the seven Phillips head screws
securing the motor housing cover, then remove
31