Intended Use - Schellenberg TIMER PLUS Manual De Instrucciones

INTENDED USE

The timer switch (Item no� 20031 / 20036) is designed exclusi-
GB
vely for the controlling of roller shutters�
The roller shutter system and its components must be in a
perfect condition� Defects in the system or its parts must be
repaired before installing the timer switch�
Any other or further utilization beyond the explicitly specified
shall be regarded as not intended�
The Alfred Schellenberg GmbH shall not be liable for any
consequential damage, property damage and personal injury
due to improper use�
Please keep these instructions stored in a safe place, as they
must be available to every user�
Compatible with most exchange frames with a 50 x 50 mm
cutout according to DIN 49075� An adapter from the respec-
tive manufacturer is required� The timer switch features an
automatic changeover between daylight savings and standard
time� During the clock change the internal clock will be set
ahead or back by 1 hour�
21