Setting The Power Level - LG CBIS3618B Manual Del Propietário

us_main.book.book Page 23 Friday, August 19, 2022 2:09 PM
CAUTION
• Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the
cooktop surface.
Activating the Cooktop
To turn on the cooktop, press the POWER key for
approximately 1 second. The LCD panel will turn
on. To turn off the cooktop, press the POWER key.
NOTE
• After turning on the cooktop with the POWER
key, you must select one of the cooking zones
within 60 seconds. If no selection is made, the
cooktop will turn off for safety.
Automatic Detection
• The automatic detection function checks
whether or not a container is placed on top of
the burner.
• When a container is placed on the burner, the
words "Auto Detected" will be displayed. (The
words "Auto Detected" will disappear after 30
seconds or when the burner is running.)
• The words "Auto Detected" will not be displayed
if a container is not placed on the burner, and
this function is activated initially only once after
the power is turned on.
• Depending on the conditions of use (whether
the burner is being used, the container material,
status of the container base, etc.), the automatic
detection time may differ or the cookware may
not be detected automatically.
NOTE
• If the cookware is too small, the words "Auto
Detected" may not be displayed.
• Minimum cookware size
- Use cookware with a bottom surface diameter
of 5 13/16" (147 mm) or greater.
- For flexible cooking zone, minimum cookware
size is 4 3/4" x 10 5/8" (120 mm x 270mm).
Selecting the Cooking Zone
Place an induction-compatible pan on top of the
desired cooking zone.
Press the icon in the desired cooking zone on
s
the display to set the power level.
NOTE
• Once the cooking zone has been selected the
power level must be selected within 3 seconds
with the element power settings. Otherwise, the
power settings will turn off for safety.

Setting the Power Level

The power level for the selected cooking zone can
be set from 1 to 9.
Selecting the Power Level
1
Press a number in the Power Levels popup to
set the power level from 1 to 9. If you've set 17
power levels in the settings menu, press the
dots between the numbers to adjust the
power level up or down half a step.
OPERATION 23