EIBENSTOCK EHR 20.1 R Instrucciones De Servicio página 12

Technical Data
Stirrer EHR 20.1 R
Rated voltage:
Rated power input:
Rated current:
Frequency:
Load Speed:
Max. basket diameter:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Order number:
Interference suppression:
Available special accessories:
Round Stirring Rod RG 120
Helicon Ribbon Stirring Rod WG 135
Mortar Stirring Rod MG 140
Mortar Stirring Rod Stainless-Steel MGV 140
... with M 14 Thread Connection
Stirrer with stirring rod and operating instructions in a set box
Application for Intended Purpose
The Stirrer EHR 20.1 R is designed for use in mixing of prefab plaster, gypsum,
lime, concrete and other building materials of medium and high viscosity in
batches up to 50 kg.
The diameter of the used stirrer should not exceed 140 mm.
Safety Instructions
Safe work with the machine is only possible, if you read
these operating instructions completely and strictly
follow the instructions contained herein.
In addition, the general safety instructions in the
enclosed brochure have to be observed. Take part in a
practical introduction before the first use. Save all
warnings and instructions for future reference.
Item
Supply
230 V ~
1300 W
6,8 A
EN 55014 and EN 61000
12
110 V ~
1200 W
11,5 A
50 - 60 Hz
250 – 580 rpm
140 mm
M 14
II
IP 20
about. 4,9 kg
07742000
Order No.
31124000
31225000
31326000
31426000