Cleaning And Maintenance - ProKlima LG04-13AR Manual De Instrucciones

Cleaning and maintenance

Switch the product off and unplug from the power outlet before cleaning.
1. Always remove the plug from the socket-outlet and allow the fan blower to stop acting before clean
it.
2. Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.
WARNING:
Do not immerse the unit in water.
Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior (special for the PCB) to get wet as this could create a hazard.
3. After extended periods of use, be sure to replace the water in the tank with fresh clean water at least
weekly. Also remember to clean the filter by unscrewing the filter and removing the filter cradle. It should
be cleaned in a mild soapy solution and then left to dry before replacing the filter.
4. When the unit is not in use, make sure that it is unplugged from the wall socket, water is drained
thoroughly and it is placed back into its original box for storage until later use.
5. In case of malfunction or doubt, do not try to repair the fan yourself, it may result in a fire hazard or
electric shock.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
129