Epson L565 Guia De Instalacion página 3

L565
Start Here
1
Unpack
Note: The included ink bottles must be used for product setup and are not for resale.
2
Fill ink tanks
Note: This product requires careful handling of ink. Wear plastic gloves and place a sheet
of paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If
ink spills, wipe it off immediately to avoid permanent stains. If ink gets on your clothes or
belongings, it may not come off.
Turn on the printer. Select your language,
country, date, and time.
Note: You can change these settings later using
the product's control panel. For more information,
see the online User's Guide.
3
Load paper
Caution: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum
packed to maintain reliability.
Warning: Keep ink bottles out of the reach of children and do not drink the ink.
Caution: Replace bottle cap tightly, or
ink may leak.
Press and hold the OK button for 3 seconds.
Read these instructions before using your product.
Make sure to use the ink bottles that came
with your product and use all of the ink.
Fill each tank with the correct ink color.
Press one of the Iniciar buttons to start
charging the ink. Ink charging takes approximately
20 minutes. Ink charging is complete when the
power light stops flashing.
Caution: Do not turn off the printer while it is priming or
you'll waste ink.
Select the paper settings on the product's
control panel.