Before The First Use - Domo DO7351CH Manual De Instrucciones

BEFORE THE FIRST USE

Remove all the packaging material. In the package, you will find 2 feet. To attach these to the unit, follow
the steps below:
1. Turn the unit upside down.
2. Unscrew the centre screw on both sides of the unit.
3. Place the feet on the right side of the unit, with the outside facing outwards. The feet have two
hooks that fit into the recess along the screw hole.
4. Now reattach the screws to the unit to secure the feet.
5. Turn the unit upright again so that it is standing on the feet. The unit is now ready for use.
1
4
· The heater should only be operated at a minimum distance of 50 cm from any wall or other object that
could disturb its operation.
· Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors
and ceilings.
· Place the appliance on a smooth, stable surface.
· When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure
sufficient ventilation. This smell will disappear very quickly.
USE
1. Place the appliance on a smooth, stable surface. Make sure the buttons are set to MIN or 0. Plug the
power cord into a socket.
2. Turn the mode dial to one of the following settings:
· I: low – 1200 W
· II: high – 2000 W
· I with fan
· II with fan
The higher the wattage, the faster the space will be heated. To spread the heat
further into the room, choose the setting with fan.
3. Turn the temperature control knob to the desired position between MIN and MAX.
The more you turn the knob to MAX, the warmer the air will blow.
4. Turn the mode dial to 0 and the temperature knob to MIN. Then unplug the device.
Allow the unit to cool down completely before storing it.
www.domo-elektro.be
2
5
3
DO7351CH
27