Description Of The Appliance; Reverse Door - HIGH ONE 1D 242 F W742C Guia De Inicio Rapido

A
Preview of the appliance

Description of the appliance

1
Thermostat and Light
2
Glass shelves
3 Crisper
4
Leveling feet
5
Balconies
4 EN
A
Preview of the appliance

Reverse Door

Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on
something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
unscrew
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place It on a soft pad to avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both side.
unscrew
Note: remove this
screw if it presents.
2 3
5
screw
5 EN
4