Abask Q40S Manual Del Usuario página 9

Motion Detection
Audio Recording
Reversing View
Battery Charging
Display Protection
Menu Setting
Ⅵ. Installation Guide
1.Shut off the car engine, and turn off the recorder.
2.Insert a high speed TF Card (above Class 10) into the card slot
of the dash camera.
Note:Please format the TF card in the dash cam when use it first time.
3.Please fix the dash camera on the proper position of the car's
rear view mirror.
In the standby mode, if the 'motion detection'
function is on, the camera will automatically
capture the moving objects and start recording.
It will automatically stop recording while no
object is moving. This function is closed by
the system default.
You can set it on whether you need to record
sound in the process of recording. Default
is opening.
Having the rear camera installed and cabled,
the car will automatically switch to reversing
view when you reverse your car; full screen
displays the rear view.
The battery charges automatically when the
external power supplies.
It can automatically turn off the screen
display by timing so as to have the product
worked in very low power consumption;
four options for 'Display Protection' :
'off/30 seconds/1 minute/2 minutes'.
'1 minute' means the screen light will be
off and enter power saving mode after
1 minute.
In standby mode, the video resolution, loop
recording, exposure, motion detection and
recording etc. can be set by pressing the
menu button. Pressing the menu button
again can edit the system of date time,
auto power off, beep sound, language,
frequency, etc.Note: If the machine crashes
because of improper operation, please use
a tiny hard object to press the reset hole,
and then restart the dash camera, it will return
normal.
7