Polar G592 Manual De Instrucciones página 6

EN
6. Remove the castor support board, right front
castor, and left front castor consecutively.
Then install back the right castor. (Tool: socket
spanner)
7. For the hinge axis on the castor support board,
remove it from the right and install on the left.
8. Install the castor support board and left front
castor on the left bottom.
9. Install the previously removed left top hinge on
the right top. (Tool: socket spanner)
6
G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 6 G592-G595_U632-U635_CC663_CD616_CW193-CW198_ML_A5_v16_20221021.indb 6
10. Install back the font panel and fix with the
screws. Now the door opens from the right
side.
Removing the Compressor Safety
Band
• The compressor is located on the top of the
appliance, and sits on rubber washers. Under
normal operating conditions the compressor is
allowed to vibrate.
• To avoid damage through excessive motion
during transit, a stainless steel safety band is
placed over the compressor and screwed into
the top of the appliance.
• This safety band and the two screws fixing it
to the appliance must be removed before the
appliance is turned on.
Compressor
Safety Band
Compressor
Screws
2022/10/21 15:23 2022/10/21 15:23