Center Of Gravity; Seat Cushion - Aria 1.0 Manual De Usuario

3.8 CENTER OF GRAVITY

On some products it is possible to adjust the centre of gravity by unscrewing the four special screws on the frame
(two on each side), adjust the desired centre of gravity and retighten them. The adjustment must be carried out by
your specialist dealer.

3.9 SEAT CUSHION

An appropriately padded seat cushion is necessary to ensure optimal pressure distribution on the seat surface,
whether it is made of fabric or solid carbon fibre.
The cushion is attached to the seat and prevented from sliding around by Velcro strips on the seat.
WARNING!
Danger of fall!
A wrongly adjusted or non-working anti-tip device can cause falls.
Before every use of the wheelchair control it is functioning and, if necessary, have the
anti-tip device fitted or adjusted by a specialised dealer.
WARNING!
Danger of tipping
On uneven of soft ground, the anti-tip device can sink in holes or in the ground, thus
limiting or compromising its correct safety function.
Only use the anti-tip device when you are on a flat and compact surface.
13