Descargar Imprimir esta página

Marmitek Connect ARC13 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Safety Instructions
Please read these instructions thoroughly before you
use the device and keep them for future reference.
• Only for indoor use.
• Do not expose the product to extremely high or low
temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of
children.
• Repairs or service should only be performed by
qualified personnel.
Requirements
To use this device, your TV needs to support HDMI
ARC audio output.
Installation
Switch off all devices before connecting them.
• Connect the HDMI ARC port of your TV to the 'ARC
input' port of the Connect ARC13.
• Connect your speakers or headphones to the 'Audio
output' ports of the Connect ARC13.
• Use the micro-USB cable to connect the '5 VDC' port
to a 5V USB power source.
Notes for using the product
• Make sure that HDMI CEC is enabled on your TV to
control the volume with your TV remote. CEC is
called differently by all TV brands. For questions
about CEC, please check our FAQ.
• The Connect ARC13 is able to convert multi channel
audio formats (e.g. Dolby Digital or DTS 5.1) into a
stereo audio output signal.
Frequently asked questions (FAQs)
Please go to www.marmitek.com if you have any
questions.
Connections
TV
Declaration of Conformity
Hereby, Marmitek BV, declares that the Connect ARC13 is in compliance with the essential requirements of the
2014/30/EU Directives.
Full Declaration of Conformity is available at
Status of the lights
Technical specifications
Connections
Input
Output
Audio
HDMI audio formats
Vmax
Signal/noise ratio
Frequency range
Crosstalk
Housing and environment
Dimensions
Weight
Operating temperature
Operating humidity
Power
Power consumption(max)
Power supply
HDMI ARC
Connect ARC13
www.marmitek.com/en/declarations-of-conformity/
Power LED
Off: powered off
On: powered on
5.1 LED
Red: PCM audio or no signal
Red (blinking): Dolby 5.1ch
decoding
Green (blinking): DTS 5.1ch
decoding
ARC LED
Off: no ARC input signal
On: ARC input signal detected
Stereo L/R out
Powered speakers
1 x HDMI (female)
1 x L/R audio out (RCA)
1 x 3,5mm stereo jack
PCM 2.0, Dolby Digital
5.1 and DTS 5.1
2Vrms
>90dB
20Hz ~ 20kHz ± 1dB
>80dB
70 x 55 x 20 mm
80 g
0° C to 40° C
20% to 90%
0.86W
5 VDC/500mA

Publicidad

loading