Operation; Before Use - Batavia BT-CLC009 Manual De Usuario

English
• Do not expose the charger to water.
• Do not open the charger.
• Do not probe the charger.
• The appliance/tool/battery must be placed in a well
ventilated area when charging.
• The charger is intended for indoor use only.

2. Operation

Operation of Lithium-Ion Batteries
2.1
Lithium-ion batteries share many characteristics with con-
ventional batteries. The major difference is that Lithium-ion
batteries do not have a "memory" and do not require to be
completely discharged periodically. It is recommended to
charge Lithium-ion batteries after each use so they will be
fully charged when needed.
Lithium-ion batteries perform best and deliver peak output
power at room temperature. When operated in lower tem-
peratures, the battery output will be reduced.
Note: A fully charged battery will loose about 2% of its
charge per month during storage.

Before use

2.2
The battery must be charged before using it for the first
time.
Removing the battery from the machine
2.3
(See Fig. A).
• Push the battery release button (2) and pull the battery
(1) out of the machine.
WARNING: Do not try to remove the battery without press-
ing the battery release button. The drill or battery could be
damaged.
Inserting the battery into the machine
2.4
Ensure that the exterior of the battery is clean and dry before
connecting to the charger or machine.
8