Working With The Device - hillvert HT-LOGAN-750B Manual De Instrucciones

REFUELING
1. Place the device on a stable, level surface.
2. Clean the area of the fuel filler cap from any deposits to protect the fuel tank.
3. Unscrew the fuel filler cap.
4. Pour in the prepared fuel/oil mixture. For the proportion of fuel/oil and their
types, see the technical details table.
5. Tighten the fuel filler cap.
Caution: Do not add more oil to the mixture than recommended. It is prohibited to
overfill the fuel tank. If the tank overflows, remove excess fuel immediately by
suctioning it with proper equipment.
Do not over-mix fuel, to store it for the future. Stored fuel/oil mixture for two-stroke
engines may separate and become unusable, causing damage to the device's engine.
Do not prepare the mixture directly in the device's tank!
Observe the following rules when refueling:
- Never add fuel when the engine is hot.
- Use only fresh, uncontaminated petrol.
- Never add fuel when the engine is running.
- Do not fuel the tank indoors.
3.3.

Working with the device

3.3.1. Starting