ARVA NEO BT PRO Guía De Utilización página 11

3.2.2/ STEP 2: COARSE SEARCH
When one of the "VICTIM" pictograms starts blinking, your de-
vice has locked onto the signal from this burial, and you are
in the coarse search phase. Position the device on the palm
of your hand parallel to the slope and pointing in the direction
indicated on the screen. Pay close attention to the distanc-
es and directions displayed. The signals from the victims are
ranked from the strongest to weakest (from top to bottom).
If you come closer to another burial dur-
ing your search, this burial's pictogram
will, in turn, begin to blink.
11
1
2
If you are not going in the right direction,
an audible alarm accompanied by the
appearance of the U-TURN pictogram will
tell you to turn around to find the fastest
route.
SCROLLING MODE: when scrolling mode is activated (see par-
agraph 1.5/ SETTING UP YOUR DEVICE), you have the option
to select the burial you want to target. Use the "+" and "-"
buttons to select the burial you want to target (the pictogram
corresponding to this burial will blink). Please note that this
mode is reserved for expert users with advanced avalanche
rescue skills.
EN