Setting Up Your Device; Turning On The Device - ARVA NEO BT PRO Guía De Utilización

caused by battery failure (including loss of waterproofing).
We recommend that you check your device regularly, includ-
ing the operation of the OFF/SEND/SEARCH selector and the
condition of the display. Also, ensure there is no trace of cor-
rosion in the battery compartment.
The NEO BT PRO works exclusively with 3 AAA/LR03 alkaline
or lithium batteries (specify the type of batteries in the app
settings). Do not use rechargeable batteries. The label at
the bottom of the battery compartment is essential for our
after-sales service procedures; please do not remove it. You
must replace all 3 batteries at the same time. After changing
the batteries, make sure that the compartment lid is closed
properly.
Important for Switzerland: appendix 4.10 of standard
SR814.013 applies to batteries.
Disposing of a battery in a fire or furnace or
mechanically crushing or cutting a battery can
cause an explosion. Keeping a battery in a very
high-temperature environment can cause an
explosion or the escape of flammable liquid or gas. A battery
subjected to extremely low air pressure may cause an explo-
sion or leakage of flammable liquid or gas. An explosion may
result if the wrong type of battery is used.
6

1.5/ SETTING UP YOUR DEVICE

During the start-up phase, press and hold the marking but-
ton. The Bluetooth pictogram appears. You can then connect
your transceiver to your smartphone. The ARVA application
offers a number of services, including the opportunity to
register, set up and maintain your transceiver.
Turn on the transceiver by pressing on
marking to activate Bluetooth
Connect my transceiver to the app
Configure my transceiver
2/ TRANSMIT MODE

2.1/ TURNING ON THE DEVICE

The device is off when the side selector is in the OFF posi-
tion. Move the OFF/SEND/SEARCH selector to the SEND po-
EN