Environmental Protection; Technical Specifications - Metabo BSA 18 LED 5000 DUO-S Manual Original

f
7. Accessories
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
A Chargers: ASC 55, ASC 145, etc.
Order no.: 627044000ASC 55
Order no.: 627378000ASC 145
etc.
B Battery packs:
Order no.: 625367000 4.0 Ah (LiHD)
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
Order no.: 625549000 10.0 Ah (LiHD)
Order no.: 625026000 2.0 Ah (Li-Power)
Order no.: 625027000 4.0 Ah (Li-Power)
Order no.: 625028000 5.2 Ah (Li-Power)
etc.
For a complete range of accessories, see
www.metabo.com or the catalogue.
8. Cleaning
Remove the battery pack from the device
before carrying out cleaning.
Do not clean with aggressive cleaning agents.
Ensure that the lamp and the battery contacts are
dry before inserting the battery pack.
9. Repairs
Repairs to Metabo machines must be carried
out by qualified electricians only!
If any of your Metabo power tools require repairs,
please contact your Metabo service centre. For
addresses see www.metabo.com.

10. Environmental Protection

Do not allow battery packs to come into contact with
water!
Protect the environment and do not dispose
of power tools or battery packs in household
waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
tool. Prevent the contacts from short-circuiting (e.g.
by protecting them with adhesive tape).

11. Technical specifications

Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
U = voltage of the battery pack
A
P = minimum power consumption
I , min
P = maximum power consumption
I , max
Phi = minimum lamp flux
I , min
Phi = maximum lamp flux
I , max
CRI = Colour rendering index
CCT = Correlated colour temperature
m = Weight (without battery pack)
IP = protection class
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Metabowerke GmbH
PO Box 1229, 72602 Nürtingen, Germany
www.metabo.com
Subject to change in accordance with technical
progress. © by Metabo
ENGLISH en
9