Safety Instructions; General Power Tool Safety Warnings - VONROC LB502DC Traducción Del Manual Original

EN

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fi re and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of nonobservance
of the instructions in this manual.
Risk of electric shock.
Risk of fl ying objects. Keep bystanders
away from the work area.
Do not expose to rain.
Wear safety goggles.
Wear hearing protection.
Indoor use only.
Class II machine - Double insulation -
You don't need any earthed plug.
Time-lag miniature fuse-link.
Max temperature 45
Do not throw the battery into fi re.
Do not throw the battery into water.
Separate collection for Li-ion battery.
Do not dispose of the product in unsuitable
containers.
The product is in accordance with the
applicable safety standards in the European
directives.
4

GENERAL POWER TOOL SAFETY WARNINGS

Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
b) Do not operate power tools in explosive atmos-
c) Keep children and bystanders away while opera-
2) Electrical safety
a) Power tool plugs must match the outlet. Never
b) Avoid body contact with earthed or grounded
c) Do not expose power tools to rain or wet condi-
d) Do not abuse the cord. Never use the cord for
0 C.
e) When operating a power tool outdoors, use an
f) If operating a power tool in a damp location
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fi re and/or serious injury.
or dark areas invite accidents.
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
ting a power tool. Distractions can cause you to
lose control.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
tions. Water entering a power tool will increase
the risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
WWW.VONROC.COM