Product Overview; Product Specifications - Foamit F5.0L-CE Manual De Instrucciones

2

Product Overview

Product requirements
Liquid temperature range
Chemical compatibility

Product specifications

Power type
Chemical pickup type
Number of products unit can
draw from
Capacity
Discharge line length/diameter 6.5 ft. (2 m) hose, with 1/4 in. (6.4 mm) inside diameter)
Discharge wand/tip type
Output distance
Output volume
Flow rate*
Pump seals
Run time from full tank**
Unit weight (empty)
Unit weight (full)
*Dilution rates and flow rates given are based on viscosity of water and factory air pressure settings.
**Area covered and run time may vary based on humidity, air flow, and product used.
Model: F5.0L-CE | F5.0L-PSG-CE
40-100˚F (4.4-37˚C)
Chemical products used with this equipment must be formulated for this
type of application and compatible with unit materials and pump seals.
For more information on chemical compatibility, consult the manufacturer
or SDS for your product or contact our customer service department.
F5.0L
Manual
Pre-mixed solution
One product
1.3 gallons (5 liters)
Polypropylene trigger handle with
17 in. (43.2 cm) wand extension and
110˚ fan tip
1-3 ft. (0.3-0.9 m)
1 gal/min (3.8 l/min)
0.24 gal/min (0.9 l/min)
Viton
Approx. 5 min.
5.2 lbs (2.4 kg)
16.0 lbs (7.3 kg)
F5.0L-PSG
Polypropylene trigger handle with 65˚
fan tip
3-5 ft. (0.9-1.5 m)
2.5 gal/min (9.5 l/min)
0.45 gal/min (1.7 l/min)
Approx. 3 min
V20221012
English
User Manual
Original Instructions
• Page 4 of 52