Standard Installation - ctronics CTSC-J7 Manual Del Usuario

①Mark the screw holes.
Remove the wall mount from your
doorbell and use it as a template
to mark the location of the two
mounting holes on your wall.
②lnstall the wall mount.
Screw the bracket into a wooden
stud in the wall with the provided
mounting screws.lf installing on
stucco, brick, or concrete, drill
holes in your wall, then insert the
included anchors before driving in
the mounting screws.
③Mount your doorbell.
Attach your doorbell to the mounting
bracket and then snap the doorbell
into place to make sure it reaches
the bottom. Secure it with the
provided star-shaped security screw,
using the provided screwdriver bit.

Standard Installation

All set!
Congrats!
13