EGAmaster AQUA Master 79917 Manual De Instrucciones página 33

First connect the machine and then connect the hydraulic supply.
Prior to starting the machine put the lever 3 (for rotation direction left and right) into the
correct position (see fig. 4).
For example, if you want to loosen a screw and the rotation direction is adjusted to a position
for screwing in, this can lead to violent uncontrolled movement of the hydraulic impact wrench.
Setting the rotation direction
The lever 3 (see fig. 4) is for setting the rotation direction.
Actuate this lever only when the hydraulic impact wrench is switched off.
Rotation direction right
The rotation direction can be changed only by lever 3 (see fig. 4) NOT by changing the
connection of the hoses.
When starting with cold oil, warm the oil up to 10°C at free speed before working.
Insert tool
Slide the socket over the square drive 7 (see fig. 5). Pay attention that the socket is firmly
seated.
Only use sockets with suitable shank (see "Technical Specification").
Rotation direction left
Fig. 4
Fig. 5
33