With the thermostat control switch in the "O" position and the power
setting switches in the "OFF" Position; plug the heater into the main
power supply.
2. Switch the heater.
3. The power switch lights up when activated.
4. Turning the thermostat control clockwise will increase the "set"
temperature.
5. Turning the thermostat anti-clockwise will decrease the "set"
temperature.
6. Do not cover the heater at any time during operation. There is a
risk of fire if the heater is covered.
7. Once you have finished using your heater. Turn the power
switches off, and the thermostat control switch to the
"0"positions and unplug from the mains supply.
5. STORING YOUR OIL-FILLED HEATER
1. Save the box for off season storage.
2. Clean the heater following the cleaning instructions above.
1.
Room temperature can
be
adjusted
thermostat. Simply turn the
thermostat knob clockwise, to
increase the heat, and anti-
clockwise to decrease the
temperature, until you reach
the desired temperature.
using
the
20