Technical Parameter; Parts List - DCU Tecnologic 70100010 Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENG

1. Technical Parameter

Max VESA: 400×400 ; Maximum load:40kgs.

2. Parts List

Please check the parts in the package in comparison with the following list, make sure all of the parts
are in the package. Never use defective parts, never replace part with different specification.
QM7x80 Self-Tap Screw (4)
(E)12mm Plastic Sleeve (4)
(I)M6 Nut (4)
3. Installation and operation instructions
Note: please read the instructions carefully before installation!
STEP1
(B)10x60 Plastic Anchor (4)
(F)M6x25 screws(4)
(J)10mm Outside Wrench (1)
B
WALL
(C)Φ8x16 Flat washer (8)
(G)M8x25 screws(4)
J
Step 1:
Use the wall plate as a template to drill
four holes of dia. 10mm and 80mm
depth in the wall. Then wedge four plastic
anchors into the holes.
(D)Φ6x12 Flat washer (4)
(H)M6x12 screws(4)

Publicidad

Tabla de contenido
loading

Productos relacionados para DCU Tecnologic 70100010

Tabla de contenido