realme TechLife RMH2101 Manual Del Usuario página 11

Mopping Kit
1. Install the detachable 2-in-1
water tank
① Install the cleaning mop: A x the mop smoothly
across the bottom of the water tank.
Note: Clean the mop after each use to ensure
optimal performance.
② Fill the water tank: Open the lid, fill the tank with
water, and then fasten the lid.
Note: It is recommended to remove the dust bin
before filling the water tank. This ensures that
water does not enter the dust bin. Lift the
handle, remove the dust bin from the water
tank, fill the tank with water, and then fasten
the lid.
③ Install the water tank.
Place the dust bin in the water box and ensure
the handle is flat.
Press and hold the button on the middle of the water
tank, and then push it horizontally along the back of
the device body. You will hear a click once the
installation is successful.
9
2. Remove the detachable 2-in-1 water tank
When the device has finished cleaning, press and hold the button on
the middle of the water tank, remove the tank by pulling it backwards,
pour any remaining water out of the tank, and then clean the mop (do
not move or turn over the device while it is cleaning).
3. Usage
① Do not use the water tank when no one is at home.
② To ensure safety, remove the water tank while it is not in use and when
the device is charging.
③ Do not use the mopping function on carpets. Prevent the device from
entering carpeted areas with the restricted area function on the
mobile app.
④ To ensure optimal mopping performance, use the device to clean the
area three times before installing the mopping module.
⑤ If you need to add water or clean the mop during a cleaning task,
pause the device and follow the above steps. Do not move or turn
the device body to avoid positioning failures and loss of the map.
⑥ While the mopping function of the device can wipe surfaces to aid in
deep cleaning, it cannot e ectively remove stubborn stains in the
same manner a human can.