Remote Control - Daewoo 50DM53UA Manual De Instrucciones

Remote Control

Inserting the Batteries into the Remote
Remove the screw that secures the battery compart-
ment cover on the back side of the remote control first.
Lift the cover gently. Insert two 1.5V - size AAA bat-
teries. Make sure the (+) and (-) signs match (observe
correct polarity). Do not mix old and new batteries.
Replace only with same or equivalent type. Place the
cover back on. Then screw the cover back on again.
To pair remote with the TV
When TV is turned on for the first time, a search for
accessories will be performed after the initial setup
starts. You will need to pair your remote control with
your TV at this point.
Press and hold the Source button on the remote until
the LED on the remote starts to blink, then release
the Source button. That means the remote is in
pairing mode.
Now you will wait for the TV to find your remote. Select
the name of your remote and press OK when it appears
on the TV screen.
When the paring process is successful, the LED on the
remote will go off. If the pairing process fails the remote
will enter sleep mode after 30 seconds.
In order to pair your remote later on, you can go to
Settings menu, highlight Remotes & Accessories
option and press OK to start a search for accessories.
1.
2.
3.
4.
28
5.
27
6.
7.
8.
9.
10. Netflix: Launches the Netflix application
11. Prime Video: Launches the Amazon Prime Video
12. Menu: Displays Live TV Settings menu (in Live TV
13. Rewind: Moves frames backwards in media such as
14. Stop: Stops the media being played
15. Record: Records programmes in Live TV mode
16. Coloured Buttons: Follow the on-screen instructions for
17. Pause: Pauses the media being played, starts timeshift
18. Text: Opens and closes teletext (where available in
19. Fast forward: Moves frames forward in media such
20. Source: Shows all available broadcast and content
21. Google Play: Launches the Google Play Store appli-
22. YouTube: Launches the YouTube application
23. Exit: Closes and exits from Live TV Settings menus,
24. Directional buttons: Navigates menus, setting options,
25. Info: Displays information about on-screen content
26. Programme +/-: Increases/Decreases channel number
27. Mute: Completely turns off the volume of the TV
28. Subtitles: Turns subtitles on and off (where available)
Standby Button
Press and hold the Standby button on the remote
control. Power off dialogue will appear on the screen.
Highlight OK and press the OK button. The TV will
switch into standby mode. Press briefly and release
to switch the TV into quick standby mode or to switch
on the TV when in quick standby or standby mode.
English - 8 -
Standby: Quick Standby / Standby / On
Numeric buttons: Switches the channel in Live TV
mode, enters a number or a letter in the text box on
the screen
Language: Switches among sound modes (analogue
TV), displays and changes audio language (digital TV,
where available)
Volume +/-
Microphone: Activates the microphone on the remote
Home: Opens the Home Screen
Guide: Displays the electronic programme guide in
Live TV mode
OK: Confirms selections, enters to sub-menus, views
channel list (in Live TV mode)
Back/Return: Returns to previous menu screen, goes
one step back, closes open windows, closes teletext (in
Live TV-Teletext mode)
application
mode), displays available setting options such as sound
and picture
movies
coloured button functions
recording in Live TV mode
Play: Starts to play selected media
Live TV mode)
as movies
sources, closes the Home Screen and switches to last
set source, is also used in pairing process of the remote.
cation
closes the Home Screen, exits from any running
application or menu or OSD banner, switches to last
set source
moves the focus or cursor etc., sets record time and
displays the subpages in Live TV-Teletext mode when
pressed Right or Left. Follow the on-screen instructions.
in Live TV mode