Snow Joe SUNJOE SPX4001 Manual Del Operador página 7

6. Insert high pressure hose into opening, as shown,
until it clicks securely in place (Fig. 4).
Fig. 4
High pressure hose
4. Fit the stainless steel lance into the trigger gun and rotate
the collar until the two parts are completely locked (Fig. 5).
Fig. 5
Trigger gun
Stainless
steel lance
5. Connect the high-pressure hose to the trigger gun
(Fig. 6).
Fig. 6
High-pressure hose
All manuals and user guides at all-guides.com
Hose reel
opening
Collar
Trigger gun
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses
regularly and replace if damaged. Do not attempt to
mend a damaged hose.
7. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Figs. 7 – 8). The garden hose must have an
internal diameter of at least 13 mm (1/2 in.) and must be
reinforced. The water supply must be at least equal to the
washer delivery capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
Fig. 7
Water inlet
(female coupler)
Garden hose adapter
(female coupler)
Garden hose This end to the
(male end) water inlet on
the unit
Fig. 8
Garden hose adapter
(female coupler)
Garden hose
7
(FRONT)
(FRONT)