Rear Panel - Intellinet Network Solutions IPS-24G02-370WB Guia De Inicio Rapido

Rear Panel

Power
Use the included power cord to connect the device (on the rear panel) to
an AC outlet. The device supports AC 100 – 240 V, 50/60 Hz.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to
provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis
grounding screw, it should be wired to an object that provides earth ground. In rackmount
installations, grounding is typically provided by the metal frame of the mounting rack.
Placement
Desktop Installation
Prior to use, it is recommended that the switch be placed/positioned on a level surface that can
support the weight of the switch (and possibly other objects) with at least 25 mm (approx. 1") of
clearance for ventilation; away from sources of electrical noise (radios, transmitters, broadband
amplifiers); and within 100 m (approx. 328') of network devices it's to be connected to.
Rackmount Installation
The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets
on the switch's side panels (one on each side) and secure them with the screws provided.
Use the screws provided with the equipment rack to mount the
Intellinet Network Solutions switch to the rack.
Instructions
3
English