Intended Use; Product Features; Technical Data - Bosch GWS Professional 700 Manual Original

Intended use

The power tool is intended for cutting and brushing metal,
stone, plastics and composite materials, for roughing metal,
plastics and composite materials without the use of water.
Make sure that the correct protective guard is used (see "Op-
eration", page 25).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Combination wrench for M 14 grinding spindle
(4) Speed preselection thumbwheel (GWS 750 S)
(5) Vibration-damping auxiliary handle (insulated grip-
a)
ping surface)
(6) Standard auxiliary handle (insulated gripping sur-
a)
face)
(7) Extraction guard for grinding
(8) Protective guard for grinding

Technical Data

Angle Grinder
Article number
Rated power input W
Power output W
A) –1
Rated no-load speed min
–1
Speed adjustment min
range
Max. grinding disc mm
diameter/rubber
sanding pad diameter
Grinding spindle
thread
Max. thread length of mm
grinding spindle
Speed preselection
Restart protection
Soft start
Weight according to kg
EPTA-Proced-
B)
ure 01:2014
Bosch Power Tools
a)
a)
GWS 700 GWS 700
3 601 C94 0.. 3 601 C94 0.. 3 601 C94 0..
3 601 C94 2..
700 700
355 355
11,000 11,000
– –
115 125
M 14 M 14
22 22
– –
● ●
– –
1.8–2.0 1.8–2.0
(9) Locking screw for protective guard
(10) Protective guard for cutting
(11) Cover for cutting
(12) Mounting flange with O‑ring
a)
(13) Carbide grinding head
a)
(14) Grinding disc
(15) Disc brush (dia. 22.22 mm)
a)
(16) Disc brush (M 14)
a)
(17) Cutting disc
a)
(18) Diamond cutting disc
(19) Clamping nut
(20) Quick-clamping nut
(21) Handle (insulated gripping surface)
(22) Grinding spindle
a)
(23) Hand guard
a)
(24) Rubber sanding pad
a)
(25) Sanding sheet
a)
(26) Round nut
a)
(27) Cup brush
a)
(28) Conical brush
a)
(29) Open-ended spanner
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 750 GWS 750 GWS 750 S
3 601 C94 0.. 3 601 C94 1.. 3 601 C94 1..
750 750
380 380
11,000 11,000
– –
115 125
M 14 M 14
22 22
– –
● ●
– –
1.8–2.0 1.8–2.0
English | 21
a)
a)
a)
GWS 750 S
750 750
380 380
11,000 11,000
2,800– 2,800–
11,000 11,000
115 125
M 14 M 14
22 22
● ●
● ●
● ●
1.8–2.0 1.8–2.0
1 609 92A 7C4 | (24.11.2022)