Emergency Stop Button - Mobiclinic FORTUNA Manual De Instrucciones

FORTUNA
5. USER MANUAL
5.1. Use of controller
Control the upper and lower part of the lift arm by means of the
hand control's up and down buttons.
The patient lift stops working once the up and down buttons
are released.
UP
BUTTON

5.3. Emergency stop button

The emergency stop button is used to switch the power on/off. It allows the engine to stop running immediately in case of danger.
Off: press the red button (see picture A).
On: turn the red button clockwise (see picture B) and the control device will be activated.
It is recommended that this button be pressed if the lift has not been used for more than 3 days, to prolong the battery life.
5.4. Emergency ascent and descent
In case of malfunction at the controller or no controller, press
the up/down button to return the actuator to its place.
up button
Down button
5.5.1. Insert 4 cables into 4 different ports
as appropriate one by one.
ES EN FR
DOWN
BUTTON
A
B
5.5.2. There is a plastic cover which is used
to cover the power port after charging.
IT DE PT
5.2. Base width adjustment
The width of the base can be adjusted with the foot pedal. Press
the pedal to the left for a wider base and press the pedal to the
right for a narrow base.
5.5. Control device connection
There are 4 ports on the control device, 1 for the controller, 2 for
the actuator and the rest for the power supply.
5.5.3. After charging, fix the cable on the
"T" knob.
NL PL
SWE
A. For the controller
B. For the actuator
C. Power Supply
D. For actuator (optional)
D
C
DK
13