Novital covatutto GIRAUOVA AUTOMATICO Manual De Instrucciones página 23

r
r
22
c
a
m
r
h
r
3 Remove the nut (c), which is to
be found inside the tray.
4 If the incubator is not
prearranged for the installation of
the automatic egg turning device,
go on following the instructions,
otherwise go to point 7. If there
are no marks in the cabinet, peel
off the adhesive protection paper
from the drilling template (h). Place
the template by centring the hole
(p) with the hole (m) in the manual
turning rod, which is already present
in the cabinet; keep the outline of
the template (h) parallel with the
h
outline of the cabinet (a) and, after
that, stick the template (h).
p
5 Drill the cabinet in the four
points (r) by using a drill with a
3mm-diameter bit. Remove the
template (h).
Ø 3 mm