Troubleshooting; Technical Specifications; Disposal Of Old Electrical Appliances - cecotec BAMBA 04199 Manual De Instrucciones

EN
central part counterclockwise.
Remove the inner cutter and clean it. Use the short side of the brush to
clean the inner cutter.
Use the long side of the brush to clean the guard, foil frame, hair
chamber and shaver body.
Blow out hair clippings from the attachment and the body.
Reassemble the device's parts.
Maintenance of the cutting system
Note: It is suggested to replace the shaving cap and shaving head at
least every year in order to maintain the shaver's cutting performance.

5. TROUBLESHOOTING

Problem Cause
The device No battery.
does not turn Defective switch.
on
Poor shaving Cutter damaged
results or worn.
Dirty shaving
heads.
Low battery.
The indicator Indicator or circuit
does not work defective.
38
Solution
Connect the device to a power
supply.
Contact the Technical Support
Service of Cecotec.
Replace the cutter.
Clean the shaving heads.
Connect the device to a power
supply.
Contact the Technical Support
Service of Cecotec.
The device Defective shaver
does not or power cord.
charge Temperature too
low or high.
After full Different use,
charge the types of beard
device does and density will
not operate give different
for more than operating times.
40 minutes

6. TECHNICAL SPECIFICATIONS

Product name: 04199
Product reference: Bamba PrecisionCare Titanium PerfectCut
8 W, 5 V, 1 A
Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE), specifies
that old household electrical appliances must not be
disposed of with the normal unsorted municipal
waste. Old appliances must be collected separately,
in order to optimize the recovery and recycling of the
materials they contain and reduce the impact on human health and the
EN
Contact the Technical Support
Service of Cecotec.
Relocate the device to a
normal room temperature
(5-35 ºC).
39