Qilive Q.5660 Manual Del Usuario página 14

EN
1
3
5. Reattach the dust cup in the main body.
6.3 Maintaining the floor nozzle
Note: If you run over a hard or sharp object or notice a noise change while vacuuming,
check for blockages or objects caught in the roller brush.
1. To remove the roller brush, press the roller brush release button and it pops up
automatically. Gently pull the roller brush out from the side.
2. Clean the roller brush and remove any stubborn dirt. Cut any threads or hairs that
have wound themselves around the roller brush with a pair of scissors. Wipe the
roller brush compartment with a soft, damp cloth. Let it dry completely.
3. Replace the roller brush into its compartment until it locks securely in place.
6.4 Checking for blockages
6.4.1 Checking for blockages in the main body
1. Turn off the appliance.
2. Disconnect the tube from the main body by pressing the main
body release button.
3. Check all intake openings to the dust cup and remove any debris
or blockage.
6.4.2 Checking for blockages in the tube
1. Turn off the appliance.
2. Disconnect the tube from the main body by pressing the main
body release button.
3. Disassembly the floor nozzle from the tube by pressing the floor
nozzle release button.
4. Clear any debris and blockages.
6.5 Storage
For storing the crevice tool and .round brush nozzle, use the accessories
holder, which is located on the wall mounting bracket.
2
4
14