WERKU WK400240 Instrucciones Originales página 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK400240 demolition
hammer is in accordance with the following Direc-
tives and Standards:
2006/42/EC
2014/30/EU
EN55014-1:2006+A1+A2
EN55014-2:1997+A1+A2
EN61000-3-2:2006+A1+A2
EN61000-3-3:2013
EN60745-1:2009+A11
EN60745-2-6:2010
La Coruña, 04/01/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power ......................................................... 1500W
Class .................................................................. II
Protection index ........................................... IP20
Impacts ......................................... 1000-1900 I/min
Speeds ................................................................... 6
Chisel shank system ................................ SDS MAX
Impact energy .................................................... 25 J
Net weight ................................................. 10.5 kg
Acoustic pressure LpA ..................... 102.13 dB(A)
Respective uncertainity KpA ..................... 3 dB(A)
Acoustic pressure LwA .....................
Respective uncertainity KwA ..................... 3 dB(A)
Vibration Ah ....................................... 20.38 m/s²
Respective uncertainity Kh ....................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one power tool with another. The
declared vibration total value may also be used in a
preliminary assessment of exposure. Warning: vibra-
tion emission during actual use of the power tool can
differ from the declared total value depending on the
ways in which the power tool is used. Warning: identify
safety measures to protect the operator, based on an
estimation of exposure in the actual conditions of use.
PICTOGRAMS.
SAFETY INSTRUCTIONS.
This power tool is intended to function as a demoli-
tion hammer. Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
-1 below may result in electric shock, fire and/or se-
rious injury. Keep all warnings and all instructions
for future reference. Accidents can be avoided in
many cases by recognizing a potentially hazardous
situation before it occurs and by observing appro-
priate safety procedures. Operations, such as grin-
ding, wire brushing, polishing or cutting-off are not
recommended to be performed with this power tool.
105 dB(A)
Operations for which this power tool was not desig-
ned may create a hazard and cause personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks could
ignite these materials. Keep away from children and
curious while operating a power tool. Distractions
can cause you to lose control. Keep bystanders a
safe distance away from work area. Anyone ente-
ring the work area must wear personal protective
equipment. Fragments of work piece or of a broken
accessory may fly away and cause injury beyond
immediate area of operation.
2
English
Read instruction manual
Wear eye protection
Wear ear protection
Wear mouth and nose protection
Double insulation
European conformity
2002/96/CE directive