Rega ELEX MK4 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

10
SPECIFICATIONS
AMPLIFIER OUTPUT
Power Amplifier Output (at rated 230/115V supply voltage)
Headphone Output
DISTORTION
THD+Noise (at 1dB below clip into 8Ω measurement bandwidth 22Hz to 22kHz) A-weighted
Line Inputs
Preamplifier Output
FREQUENCY RESPONSE
Bandwidth (at 80W into 8Ω)
Phono Input
Line Inputs
RIAA Accuracy
SENSITIVITY
Input Sensitivity (for 72W into 8Ω)
Phono Input
Line Inputs 2-5
Power Amplifier Gain
Output Sensitivity (at rated inputs)
Record Output
Pre-amplifier Output
DIGITAL INPUTS
Input D1
Input D2
Supported Sampling Rates
Supported Bit Depths
THD+Noise (DAC Output from Tape Out)
DIMENSIONS AND WEIGHT
Dimensions (WxHxD)
Weight
POWER
Power Supply
Power Consumption
Fuse Ratings
Remote Batteries
72W per channel into 8Ω
90W per channel into 6Ω
Note: Continued high level use into loads of 6Ω or less may cause
the case to exceed 40°C above ambient temperature and activate
the thermal shut down.
No Load
11.3V
300Ω
8.1V
54Ω
3.6V
32Ω
2.4V
Source Impedance
109Ω
Typically 0.005% at 1kHz
Typically 0.002% at 1kHz
15Hz (-3dB) to 65kHz (-3dB)
10Hz (-1dB) to 65kHz (-3dB)
Better than ±0.5dB 100Hz to 20kHz
1.6mV load 47k in parallel with 220pF
164mV load 10k
31.6dB
164mV
625mV
S/PDIF Isolated 0.5V 75Ω Co-axial
S/PDIF Optical Toslink
32, 44.1, 48, 88.2, 96, 176.4, 192kHz
16 to 24 bit
Typically 0.004% at 1kHz
432 x 82 x 340mm (17 x 3.25 x 13.4in)
11kg (24.3lbs)
AC supply 230V / 220V / 115V / 100V nominal ±10%
250W at 1dB below clip into 8Ω
T3.15 AL 250V - 230V 50Hz / 220V 60Hz
T5 AL 250V - 115V 60Hz / 100V 50/60Hz
AAA (1.5V) x 2

Publicidad

Tabla de contenido
loading

Tabla de contenido