DCU Tecnologic 70100025 Manual De Instalación página 7

ENG
STEP-3
Left
I
STEP-4
TV
F/G
D
E
STEP-5
WALL
STEP-6
WALL
J
K
K
J I
TV
TV
Step 3:
Install the knobs to the hanging arms
(I/J/K), with one piece of washer each
side.
Right
Step 4:
Install the bracket rail onto the back of
the TV. Screw two bolts into the holes in
the back of the panel TV to install each
monitor bracket. Make sure the distance
from each bracket to the top of the panel
TV is equal, and also as center as
possible. The parts shall be selected
according to the dimensions of the holes
in the back of the panel TV.
Step 5:
Enlarged view 1: hang the two monitor
brackets on the wall plate, relax the
hands until they are caught hold of.
Enlarged view 2: Fix the two bolts under
the monitor brackets inside of the wall
plate and then screw them down.
Enlarged view 1
Enlarged view 2
Step 6:
Adjust the angle of the panel TV between
-10 and +10 degrees to a suitable
position, and screw the knobs up at last.
+10°
-10°