Safety Instructions - EcoFlow RIVER 2 Max Guia De Inicio Rapido

SAFETY INSTRUCTIONS

1. Do not use the product near a heat source, such as a fire source or a heating
furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it
wet. Do not use the product in rain or humid environments.
3. Do not use the product in an environment with strong static electricity/
magnetic fields.
4. Do not disassemble the product in any way or pierce the product with sharp
objects.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use unofficial components or accessories. If you need to replace any
components or accessories, please visit official EcoFlow channels to check
relevant information.
7. When using the product, please strictly follow the operating environment
temperature specified in this user manual. If the temperature is too high, it
may result in a fire or explosion; if the temperature is too low, the product
performance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated
or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case
of a severe external impact, turn off the power supply immediately and stop
using the product. Ensure the product is well fastened during transportation
to avoid vibrations and impacts.
11. If you accidentally drop the product into water during use, please place
it in a safe open area, and stay away from it until it is completely dry. The
dried product should not be used again, and should be properly disposed of
according to the disposal guide in the user manual. If the product catches
fire, we recommend that you use the fire extinguishers in the following order:
water or water mist, sand, fire blanket, dry powder, and finally a carbon
dioxide fire extinguisher.
12. Use a dry cloth to clean off dirt on the product ports.
13. Do Not put into the Microwave.