How To Use - Duronic MFP400 Manual De Instrucciones

Assembling and Using the Food Processor
1. Position the Main Unit(11) on a flat and stable surface. Check that the rubber
feet are firmly in place on the surface to ensure that the appliance doesn't
wobble during use.
2. Check that the Control Dial(12) is turned to OFF(O) and the machine is
unplugged.
3. Lock the Bowl(10) onto Base Unit.
4. Place the Plastic Shredding and Slicing Disk(6) onto the motor shaft(9). Put
slicer/grater disk(5) on top of the plastic disk with the desired side facing up
ready for either slicing or grating.
5. Next, place Food Processor Lid(4) onto the bowl and have the Food
Pusher(1) ready to use.
6. Place a bowl or container directly underneath the Food Processor Spout(7)
7. Plug in the main unit to a mains plug socket.
8. Place the ingredients into the Food Chute. To slice/grate large foods (such as
a chunk of cabbage, green pepper or a whole tomato) you may need to slice
it in half first so that it fits into the Food Processing Chute.
Tip: To slice vegetables into julienne style, slice them first, then remove from
bowl and re-stack the vegetables. Then put them into food chute with the slices
vertical. Slice again to make match-stick cut vegetables.

How to Use

11
1 Grate
2 Slice