Duronic MFP400 Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Always operate the appliance on a dry, smooth, even and stable surface. Do
not place the food processor on or next to a hot surface.
Position the appliance and its power cable to the rear of the work surface,
well out of reach of children.
Disconnect the mains plug from the power socket if you are going to be
absent for long periods.
Never disconnect the plug by pulling on the power cable.
Unplug from the mains plug outlet when not in use and before cleaning.
This appliance is not intended to be operated using an external timer or
separate remote-control system.
Do not let the power cable hang over the edge of the table or counter, or
touch hot surfaces.
Do not use the appliance for anything other than blending or chopping food.
Do not operate the food processor with wet hands.
To clean, wipe the machine body with a well-wrung wet cloth. Do not
submerge it in water or other liquids. Wash the cups and lids with warm water
and soap. Dry properly before placing the cups back into the machine.
Do not switch the appliance on if the bowl is empty or use the food processor
for more than 30 seconds at a time as this will overheat the motor. After 30
seconds of use, allow the machine to cool down for 3 minutes.
Be certain lid is securely locked in place before operating appliance.
Never feed food into food chute by hand. Always use food pusher.
Do not attempt to defeat the lid interlock mechanism.
Make sure the blade or disc has come to a full stop before removing lid.
Use caution when removing blade and disc from the bowl, when emptying the
bowl, and when cleaning.
Safety Information (continued)
8

Publicidad

Tabla de contenido
loading

Tabla de contenido