Duronic MFP400 Manual De Instrucciones página 15

Potential
Problem
The food
processor does
not operate on
any speed or
pulse.
Food is not
chopped, sliced
or shredded
uniformly.
Unit stops and
will not come
back on.
Unit has a
burning smell.
Motor seems
weak.
Troubleshooting
1. Is the machine plugged in? Does the mains socket work ok?
2. Are the bowl, lid and feed chute all locked in place? See section
called 'Before First Use'
Packing too much food in the feed chute, or pushing too hard on the
feed pusher may cause the processed food to be irregularly sliced or
shredded.
1. Are the bowl and feed chute lid all locked in place? They may
have moved slightly during processing.
2. Is the mains plug socket still working? Check it by plugging in a
working lamp or other appliance. You may have overloaded the
circuit and blown a fuse or tripped the circuit breaker.
3. Turn the food processor OFF, allow it to stand for 3 to 4 minutes,
then turn back ON.
If none of these suggestions correct the problem, DO NOT attempt
to repair the unit. Contact the Duronic Customer Care Team for
further assistance.
There may be a residue left on the motor from the manufacturing
process, causing a slight odour during initial use. This will go away.
If a strong odour or any visible smoke appears, unplug the food
processor IMMEDIATELY and contact the Duronic Customer Care
Team.
1. Are you using the recommended speed for the food you are
processing?
2. Are you using the recommended food size and quantity to be
processed?
Probable Cause / Solution
15