AENO DB1S Manual Del Usuario página 11

the power adapter. Solution: Make sure the cord is intact and that the
outlet is working. Check if the AC adapter has (DC) 5.0 V, 1.0 A output.
• The brush head vibrates very weakly. Possible Cause: The attachment is too
tight on the handle of the device. Solution to the problem: make sure that
there is a small gap at the mating point (11), about 1 mm.
• Short working time after fully charged. Possible cause: The device has not
been used for more than 6 months, so the battery may not hold a charge
well. Solution: contact the service center and replace the device battery.
ATTENTION! If none of the possible remedies resolves your problem, contact
your supplier or service center. Do not disassemble the device or try to repair it
yourself.
Connecting to the AENO mobile app
Turn on the device by pressing the button (10). Make sure that the battery of
the device is charged. The indicator (4) should light up green or orange. Place
your smartphone as close to the device as possible.
• Download the AENO mobile app from Google Play or the Apple Store and
register a new account (or sign in to an existing one).
• On the main application screen tap «+» or «Add device» (if there are no
devices added to the application). In the window that opens select the
«Toothbrush» category.
NOTE. If a system prompts you to turn on any features on your smartphone,
follow the recommendations in the prompts.
• On the «Reset the device» screen (steps 1-2) click «Next». You do not need to
press any buttons on the device.
*Google Play is a registered trademark of Google LLC, and Apple Store is a registered trademark of
Apple Inc.
aeno.com/documents
*
11