Cleaning And Maintenance - Concept ZS8010 Manual Del Usuario

EN
2. Set the temperature controller to the minimum.
3. Insert the plug into the mains outlet.
4. Set the temperature controller to the value that corresponds to the material to be ironed (according to the
international textile codes). The heating indicator will be illuminated.
Note: Iron the fabrics that require a lower temperature first, then those at higher temperatures. Most of the textile
materials are marked according to international codes – see the table below.
Note:
The icon
Ironing information label
5. Wait until the heating indicator light stops shining. Only then is the ironing surface at the right temperature. The
ironing surface will be heated during ironing. The heating indicator will turn on and off.
6. After use, set the temperature controller to the minimum, unplug the unit from the power source, and let it cool
down. Then pour the remaining water out of the tank.
STORAGE
Keep the cooled unit in a vertical and stable position in a safe and dry place, out of the reach of children.

CLEANING AND MAINTENANCE

Unplug the unit from the power source.
Remnants of fabric fibers may adhere to the ironing surface. Remove them with a slightly rough cloth soaked in water
with vinegar. Then wipe the surface with a dry cloth.
Do not use any abrasives or steel wool to clean the ironing surface. Keep the ironing surface smooth; prevent it from
coming into contact with hard metal objects. Make sure the ironing surface is not scratched or damaged.
Clean the body with a wet cloth. Do not use aggressive substances for cleaning, such as solvents or abrasives!
Do not immerse the power cord, plug, or appliance into water or any other liquid.
REPAIR & MAINTENANCE
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert
service centre.
ZS8010
on the label means „Do not iron this fabric!"
Fabric type
Synthetic
Polypropylene
Polyurethane
Polyamide
Polyester
Viscose
Silk
Wool
Cotton
Linen
Temperature
MIN.
MAX.
23