Audio Operation; Usb Operation - Furrion FSB2N25MC-BL Manual De Usuario

Audio Operation

1. FREQUENCY SELECT
In RADIO mode: Press and hold SEL button for about 2 seconds to switch to
radio region selection mode, then press VOLUME + or VOLUME - to select
AREA USA / AREA EUR.
2. TUNE/SEARCH UP/DOWN
In RADIO mode:
Press and hold
button on the remote control to automatically search up or down for an available
station from the current frequency.
Press or
control to manually search up or down step by step for your desired station from
the current frequency.
3. AS & PS FUNCTION
In RADIO mode:
Press and hold ZONE 1 button on the front panel to automatically search the
radio frequency from the lowest frequency till the search cycle is finished. Then
10 of the strongest stations are automatically stored in the corresponding preset
memory band (FM0~FM9).When the AS (Automatic Storage) operation is
complete, the radio station will resume to the previous played station.
Press and hold ZONE 2 button on the front panel to automatically search each
preset station from FM0 to FM9. When the search cycle of PS (Preset Scan) is
complete, the radio station will resume to the previous played station.
4. PRESET STATION AND PRESET NUMBER [ 0-9 ] BUTTONS
In RADIO mode:
To memorize the current frequency station:
Press and hold one of the 10 number buttons (0-9) on the remote control to store
the current station.
Press and hold the PLAY/PAUSE button until the preset number flashes, then
press PLAY/PAUSE button repeatedly to select the preset numbers from 0 to 9.
Press and hold PLAY/PAUSE to confirm the selection.
To recall the preset memory on the current band, press one of the 10 number
buttons (0-9) on the remote control to broadcast the corresponding preset
station.

USB Operation

1. Pause Playback
During playback, press PLAY/PAUSE button on the front panel or remote control
to pause the playback, press PLAY/PAUSE button again to resume normal
playback.
2. Select Chapter with the
Press or
CCD-0005530 Rev: 06-08-22
or button on the front panel or press and hold
button on the front panel or press
or
button on the front panel or on the remote control during
button
- 7 -
or button on the remote
or