Acetech iTracer Unit Manual De Instrucciones página 21

1-1 Start to use iTracer
Unscrew the aluminum tube of iTracer Unit counterclockwise and
1.
place 4 AAA alkaline batteries in the battery holder. Then, screw the
aluminum tube clockwise to iTracer Unit.
Remove the muzzle brake of your Airsoft gun and attach iTracer Unit on
2.
the barrel tightly.
Then, mount the iTracer CD onto the rails of your Airsoft gun depending
3.
on your preference.
If your Airsoft gun is AEG, you may let the iTracer SCU be connected betw-
4.
een the AEG and the AEG battery. Please refer to the following picture:
EN
20
EN