Description; Usage; Technical Data; Instructions And Warnings - SW-Stahl 10278L Instrucciones De Uso

1.

DESCRIPTION

The machine for assembling and disassembling shock
absorbers, model 10278L, is made up of a painted metal
tubular frame. On this structure is mounted a pneumatic
piston fixed at the frame, its extension and compression
allows the compression and the release of the spring held
by control brackets.
2.

USAGE

The machine 10278L is a device for assembling and
dissasembling the shock absorbers of the cars. Every
different use is considered improper and illogical. The
manufacturer does not assume responsibility for possible
damage caused by noncompliance with instructions.
3.

TECHNICAL DATA

Air pressure
Cylinder stroke
Packaging
dimensions
Machine dimensions
Weight
4.

INSTRUCTIONS AND WARNINGS

The usage of this machine model 10278L required a
particular attention.
Compressed springs can be potential dangers due to force
collected because of compression.
This machine must be used always with its specific frontal
protection mounted correctly on the frame.

4.1 Individual protection measures

Here under listed the individual protection measures
necessary to work with our product.
Accident prevention gloves
Anti prevention shoes
10
Max 8 bar
330 mm
520x300x1600 mm
650x400x1600 mm
74 Kg
Protection glasses
Instructions Manual
4.2

Danger pictograms

The machine is equipped with pictograms that show
remaining risks and individual protection measures to be
used during working operations.
The pictograms are integral part of the product. In case of
loss, deterioration or illegibility, require the pictograms to
the constructor in order to substitute them immediately.
Replace the pictograms always in the same place where
they were removed following the above design.
5.

CARRIAGE - HANDLING

The machine weights Kg. 74. It is necessary to use a trolley
for handling and carriage.
Fix the package at the trolley through straps in order to
balance it.
6.

UNPACKING

The machine is supplied assembled and mounted on a
wooden pallet. Remove the cardboard box, the parts of the
packing and the pallet.
Secure the foot with the pedal to the
74
Kg